MPPT Charge Controller 100 amp 12V/24V Auto, 100A Solar Panel Charge Regulator with Blacklight LCD Display Max 100V for Lead-Acid Sealed Gel AGM Flooded Lithium Battery(+1.5M LCD485)
$189.99
Product Description
Feature
Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99%.
High quality components, perfecting system performance, with maximum conversion efficiency of 98.5%.
Ultra-fast tracking speed and great tracking efficiency.
Wide MPP operating voltage range.
12/24VDC automatically identifying system voltage.
LCD panel display design, dynamically displaying tool‟s operating data and working condition.
Support 3 charging lead-acid battery options: Sealed, Gel, Flooded.
Battery temperature compensation function.
Package List:
1 x 100A MPPT Solar Charge Controller K100
1 x Temperature sensor
1 x User Manual (English)
Added Features:
Blacklight LCD DisplayThe display directly shows the amount of charge: KWH, without the need for other measuring instrumentsTwo new vents are added for scientifically designed convection cooling.More Safety ProtectionMaximum DC/DC transfer efficiency is as high as 98.7%
Rated charge current:100A 12V system:open circuit voltage ≤48V(Voc) maximum. PV input power:1200W 24V battery system:Open circuit voltage ≤96V(Voc) maximum.PV input power:2400W System nominal voltage :12V/24VDC Auto identifying Battery voltage range: 9V~32V Max.PV open circuit voltage:100VDC Power terminal:10 AWG Dimension: 10.82×7.36×3.34in Weight : 5LB
COPPER COILS
True MPPT controller, The Three copper coils play a step-down roles to make your system work more stable.
TRANSFORMER
Short-circuting
Reverse-current
Overcharging
Overload
Over-discharging
Reverse polarity protection
FAN COOLING
Good Heat Gissipation
Intelligence Fan-on temperature >45℃ and off < 40℃ , let your controller feel cooling.
Fan use BEARING technologies increase life UP TO 5000hrs in normal use.
PORTS DESIGN
We consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors
MPPT technology
Automatically detect 12V or 24V DC system voltages
Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%
Various optional batteries
Deep cycle Sealed, Gel, Flooded and Lithium (12.8V LFP) battery option ready
Charges over-discharged lithium batteries
Protection System
Electronic protection: Overcharging, over-discharging, overload, and short circuit.
Reverse protection: Any combination of solar module and battery, without causing damage to any component
Customize charge controller
Customizable charging voltages
Positive ground charge controller
HOW TO WIRE YOUR SOLAR CONTROLLER?
Turn the adjusting screw counterclockwise until the plate moves downward.
Please peel off the coating of the cable tip by about 8 to 10 mm,Then Insert the wire into the new opening between the plate and the “top” of the terminal hole.
When turning the adjuster clockwise, the plate moves upward and crushes the wire in the hole of the terminal.
Make sure all connections going into and from the controller are tight.
IMPORTANT NOTE:
Make sure your battery must be atleast 60% charged prior to connecting to controller.
Always connect your battery first
Never connect your solar panel array to the controller without a battery.
Careful your input power and voltage does not exceed the max.
Battery type: LiFePO4, AGM is compatible with more battery charging;
The best open circuit voltage (Voc) of solar panels: 12V system: Voc ≥18V, Voc≤96V; 24V system: Voc ≥36V, Voc≤96V; (automatic identification of 12V/24V system);
Charging current and MAX.PV input power: (12V/24 system)100A: MAX.PV=1300W/2600W;
Prevention: overcharge, overdischarge, overload, overheat, reverse polarity, lightning and other protection functions;
The solar controller is a professional product, if you have any questions, please send an email to us first; we will answer you the first time; worry-free after-sales guarantee.
User Reviews
Be the first to review “MPPT Charge Controller 100 amp 12V/24V Auto, 100A Solar Panel Charge Regulator with Blacklight LCD Display Max 100V for Lead-Acid Sealed Gel AGM Flooded Lithium Battery(+1.5M LCD485)”
You must be logged in to post a review.
There are no reviews yet.