GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Solar Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation

Product Description

GHB Solar Charge Controller

The product can automatically manage the working of solar panel and battery in the solar system. It is easy to set up and operate.

Specifications:

Overload/Short Circuit Protection: 1.5 Times by Rated Current

DC Output Voltage: 12V

Total DC Output Current: 2A

Short Circuit Recovery Time: 10s

Open Circuit Voltage of Solar Panel: 40V

No Load Loss: 0.05W

Over Voltage Protection: 15V; x2/24V

Float Charge Voltage: 14V; x2/24V

Discharge Recovery Voltage: 12V; x2/24V

Over-Discharge Voltage: 10.5V; x2/24V

Working Temperature: -35~55°C

Solar Charger Controller

No matter at home or on the road, the GHB solar charge controller operates fully automatically, easy to operate.

Safety Instructions:

1. Make sure your battery has enough voltage for the controllers to recognize the battery type (12V/24V) before installation.

2. The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. (NOT suitable for Li batteries, Ni-MH battery)

3. Only suitable for working with photovoltaic solar panels. (NOT for other DC or AC power source)

Easy to Operate

1. Connect the battery to the charge regulator – plus and minus.

2. Connect the solar panel to the regulator – plus and minus.

3. Connect the load to the charge regulator – plus and minus.

NOTE: The reverse order applies when deinstalling! An improper sequence order can damage the controller!

Dual USB Charging Output Inter

Dual USB output (1A, 2A), this solar charge controller can simultaneously charge or supply power to two mobile phones, tablet PCs and other devices that require 5V power.

Fully Automatically

Makes you use 100% Available Solar Power. (Note: The battery cable should be as short as possible to minimize loss.)

Provide Full Protection

Over-load protectionShort circuit protectionLightning protectionUnder-voltage protectionOver-charging protectionReverse Polarity protection

LCD Screen Display: This solar panel charger controller with LCD to display all parameters, the LCD has rich contents, the users can intuitively know the working condition of the controller. The LCD display is with built-in energy-saving backlight LCD, display better, more clear, more beautiful, more modern and more power-efficient. (Please correctly connect the positive and negative terminals, makes sure all terminals are connected tightly.)
Fully Automatic: This solar panel regulator with output switch, intelligent control, easy to operate, to connect the controller and the battery by cables with the right polarity. The battery indicator light on the controller will be on if successfully connected, otherwise, to check and reconnect.
Power-efficient: Microcontroller digital accuracy, when it’s charging, the arrow between the panel icon and the battery icon will flashe fastly, when the battery was a full charge, it will be slow flashed, will stop charging,the function of the controller is to protect the voltage overshoot and discharge. Available for DC lamp and phone charging. A key to open and close the load.
Rated Discharge Current : 20A; USB Output Voltage: 5V; USB Output Current: 1.5A; DC Output Voltage: 12V-24V, DC Output Current: 20A. To connect your load and the cables with the right polarity and then connect with the load output port of the controller. Pay special attention to + – polarity to avoid reversed connection, otherwise, your load may be damaged.
Protection Functions: Overload and Short circuit protection, Lightning protection, Under-voltage protection, Over-charging protection, Reverse Polarity protection. Use PWM&WPC mode, improve system efficiency and prolong the life span of the battery.